Magnus VT-4000 Tripod System with Fluid Head

General
Load Capacity	8.8 lb (4 kg)
Maximum Height	59.0" (150 cm)
Minimum Height	27.6" (70.1 cm)
Folded Length	30.3" (77 cm)
Leveling Bubble/Illuminated	Yes/no
Weight	7.9 lb (3.6 kg)
Head
Counter Balance System	Fixed counter-balance spring @ 3.3 lb (1.5 kg)
Quick Release/Wedge Plate	Yes/no
Balance Plate	Yes
Slide Range	+20/-25mm
Tilt Drag	Yes
Tilt Range	+90/-60°
Tilt Lock	Yes
Pan Lock	Yes
Legs
Head Attachment Fitting	65 mm half bowl
Material	Anodized aluminum
Leg Stages/Sections	2/3
Leg Lock Type	Flip locks
Independent Leg Spread	No
Spiked/Retractable Feet	Yes/yes
Center Brace	Yes (mid-level)

The Magnus VT-4000 Tripod System with Fluid Head is a stable, sturdy video tripod made from anodized aluminum that can support loads up to 8.8 lb. Overall, this tripod offers many features usually only found on more expensive models. The two-way fluid head provides smooth operation, and features a half-ball mount with a diameter of 65mm, with left and right pan bar mounts. It comes supplied with one pan bar. In addition, unlike most other heads in its class, all the head controls are positioned on the left side of the head, which leaves your right hand free for the panning handle. The VT-4000 tripod system weighs 7.9 lb.

Its 2-stage leg design allows you to adjust the height of the tripod from 27.6" to 59". A middle spreader and passive counterbalance provide enhanced stability to the entire system. The VT-4000 also has separate pan and tilt locks, and a bubble level for precision leveling. The fixed counter-balance spring incorporated in the head will help with smoother tilt movements.

Its provided quick release plate features a standard 1/4"-20 mounting screw with a video pin, and has a sliding range of +20/-25mm - to enable travel capabilities - essential in balancing uneven configurations. The head's tilt angle is adjustable from +90° to -60°.

Supports loads up to 8.8 lb (4 kg)

Features a 65mm ball base

Two-way fluid head for smooth motion

Fixed counter-balance spring set to 3.3 lb (1.5 kg) provides smoother tilt movements

2-stage design allows you to adjust the height of the tripod from 27.6" to 59" (70 to 150 cm)

Middle spreader provides enhanced stability by holding the tripod legs in locked position

Provides fixed counter balance, pan, and tilt drag

Allows you to leverage the slide range of +20 / -25mm to enable travel capabilities - essential in balancing uneven configurations

Provides camera mounting via a slide plate that can be attached via a 0.25" (6.35mm) screw with video pin

Offers tilt angle adjustments from +90° to -60°

Ground spikes for outdoor use and convenient retractable rubber feet for delicate floor surfaces

Weighs 7.9 lb (3.6 kg)