Deity Microphones Connect Timecode Kit Camera-Mount Wireless Microphone System

System

Wireless Technology	Digital 2.4 GHz
Included Transmitters	2 x Bodypack with Microphone
Diversity	Intelligent Switching Diversity
RF Channel Scanning	Auto-Scan
Max Operating Range	328.1' / 100 m
Max Transmitters per Band	4
Built-In Recorder	Yes
Timecode Support	Yes
Sample Rate/Resolution	48 kHz / 24-Bit
Latency	19 ms
Encryption	Proprietary
Modulation	Proprietary

Receiver

Receiver Type	Camera-Mount / Beltpack
Mounting Options	Belt Clip, 1/4"-20 Female (with Included Hardware)
Antenna	1 x External, SMA (Top-Mount) 1 x Internal
Number of Audio Channels	1
Audio I/O	1 x 1/8" / 3.5 mm TRS Female Unbalanced Output (Lockable)
Phantom Power Protection	None
Frequency Response	20 Hz to 20 kHz
Network I/O	None
Word Clock I/O	None
USB/Lightning Connectivity	1 x USB-C (Audio, Bus Power, Charging)
RF Output Power	10 / 25 / 50 / 100 mW
Power Requirements	Battery, Bus Power (USB)
Battery Type	1 x Built-In Rechargeable (Included)
Internal Battery Capacity	2800 mAh
Battery Charging Time	130 Minutes
Approx. Battery Life	12 Hours
Display & Indicators	1 x OLED (Battery Status, Channel, High-Pass Filter, Limit, Menu Navigation, Metering, Multifunction, Mute, Output Level, Power, Recharging, Sync, Transmitter Battery Status)
Housing	Aluminum
Operating Temperature	14 to 113°F / -10 to 45°C
Dimensions	2.5 x 3.3 x 0.7" / 63.5 x 83.8 x 18.5 mm
Weight	5.6 oz / 160 g

Transmitter

Transmitter Type	Bodypack with Microphone / Camera-Mount
RF Output Power	10 / 25 / 50 / 100 mW
Audio I/O	1 x 1/8" / 3.5 mm TRS Female Unbalanced Input (Lockable)
Plug-In Power	2.5 V
Pad	None
Auto-Level Control	No
Gain Range	-12 to +36 dB
Frequency Response	20 Hz to 20 kHz
Sync Method	Proprietary
Antenna	1 x External, Detachable (Beltpack)
Power Requirements	Battery
Battery Type	1 x Built-In Rechargeable (Included)
Internal Battery Capacity	2800 mAh
Battery Charging Time	130 Minutes
Approx. Battery Life	12 Hours
USB/Lightning I/O	1 x USB-C (Audio, Charging)
Display & Indicators	1 x OLED (Audio Level, Battery Status, Multifunction, Power)
Housing	Aluminum
Operating Temperature	14 to 113°F / -10 to 45°C
Dimensions	2.5 x 3.3 x 0.7" / 63.5 x 83.8 x 18.5 mm
Weight	5.6 oz / 160 g

Microphone

Microphone Type	Lavalier
Sound Field	Mono
Capsule	Electret Condenser
Polar Pattern	Omnidirectional

Designed to suit a wide range of content creators from solo YouTubers to small video production teams, the Deity Connect Timecode Kit is a camera-mountable wireless system featuring timecode support and simultaneous recording and transmission capabilities. The versatile system consists of two compact, metal transceiver units that are able to record audio to microSD cards—providing back-up recordings and eliminating the problem of lost takes due to wireless interference. 

The small, lightweight BP-TRX units easily attach to talent via belt clips and feature locking 3.5mm input connectors to accommodate the supplied omnidirectional lavalier microphones; foam windscreens and lapel clips are also included. Input gain is adjustable from -12 to +36 dB, while the Guard Rail analog limiter helps keep the signal from clipping and distorting if the source gets too loud—letting you place the recorder in the talent's pocket without worrying about sudden level changes. Each unit can function as a portable audio recorder with files recorded at a 24-bit / 48 kHz resolution to a microSD card (available separately) with a maximum capacity up to 128GB.

When used as a digital wireless system, the unit acting as the transmitter can record a back-up audio file at the same time, giving you a clean option if interference occurs during the wireless transmission. The Deity Connect operates in the 2.4 GHz spectrum and provides a maximum range of 328'. The receiving unit can be camera-mounted via a 1/4"-20 thread beneath the removable belt clip. To record, connect the locking 3.5mm output to your camera's 3.5mm input using the included coiled cable.

The transceiver design allows for a wide variety of uses, including IEM and camera-hopping applications, as the unit can pair with up to four BP-TRX receivers at once. What's more, it enables remote control over input levels, low-cut filter settings, high-frequency boost options, and RF output adjustments—all from the receiver. You can even remotely engange the record function on the transmiter without stopping a take, ensuring the action is uninterrupted.

The onboard SMPTE timecode generator also outputs to the 3.5mm connector, allowing you to use it as a master clock and jam-sync the other BP-TRX unit or any other devices that support timecode. The unit jam-syncs to incoming code via the same locking 3.5mm input used for the microphone. A timecode sync and audio cable is included that lets you record both signals to an external device. 

Power is supplied by a built-in rechargeable battery, allowing the BP-TRX to operate for up to 12 hours when used in transmitter or receiver modes, up to 21 hours in record mode, and up to 25 hours as a timecode-only box. The USB Type-C charging port also functions as a stereo audio interface for Mac and Windows computers. Charging cables and removeable antennas are included.

Two Compact Audio Recorder/Transceivers with Lav Mics & Input Limiting

• Each BP-TRX records 24-bit / 48 kHz audio to a microSD with a capacity of up to 128GB (available separately)
• Two omnidirectional lavalier microphones are included with foam windscreens and lapel clips
• Sennheiser-standard locking 3.5mm TRS input for compatibility with popular lavalier microphones such as the Sanken COS-11D, DPA CORE Series, Sennheiser ME 2-II, Deity W.Lav Pro, and others
• Accepts mic- or line-level signals
• Guard Rail analog limiter reduces clipping and overloads at the input stage
• Selectable stereo line-level input mode
• -12 to +36 dB input adjustment
• Compact size with durable brushed-aluminum housing for durability
• Removable belt clip with 1/4"-20 thread underneath for camera mounting when used as receiver
• Daylight-bright, high-resolution OLED screen shows statuses of all major features and real-time VU metering on the home screen
• Off / 20 / 200 Hz low-cut filter settings
• Off / +1dB to +10dB high-frequency boost at 7 kHz for added clarity and presence
• Screen and button lock to avoid accidents