Rode Stereo VideoMic Pro Rycote
1 x Rode Stereo VideoMic Pro Rycote
1 x Pouch
1 Day: $25 | 3 Day: $30 |
5 Day: $35 | 7 Day: $45 |
10 Day: $56 | 14 Day: $75 |
Please type in 'Rode stereo mic pro' in our rental form
Transducer Pressure gradient Polar Pattern XY Cardioid Frequency Range 40 Hz to 20 kHz (selectable HPF @ 75 Hz) Sensitivity -38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz Output Impedance 200 Ohms Maximum Output +4.2 dBu (@ 1% THD into 1 kOhms) Dynamic Range 100 dB Maximum SPL 134 dB, max (1 kHz, 1% THD into 1 kOhms load) Signal / Noise 76 dBA (A-weighted per IED651) Power Supply 9 V alkaline battery Connection 1/8" (3.5 mm) stereo mini-jack Signal to Noise Ratio 76 dBA SPL (A-weighted per IEC651) Dimensions (D x W x H) 4.5 x 3.1 x 5.3" (115 x 80 x 134 mm) Weight 0.26 lb (116 g) (without battery)
The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.
The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.